Title: Evercade Nexus
System: Evercade
Price: $199.99
Release Date: 10/30/2026
Prelude
It feels like Blaze releases a new system every time I blink now; whether that be a new Super Pocket, upcoming Home Computer handhelds, or another iteration of the Evercade I say I don’t need, then buy anyway for the sake of covering on the site, as part of my ever-growing lineup of wanting to review every Evercade thing ever, within reason.
So this time around, we have what I consider the “final” version of the original Evercade handheld; going from the weirdly cheap and clicky 2020 Evercade, to the professional feeling, if buggy EXP, then the more refined, comfortable EXP-R.
We’ve finally come back around to another handheld, jumping to one with analogue sticks and a fancier presentation. The Evercade Nexus is the next step up after the EXP lineup of handhelds, with analogue sticks being the main gimmick here. As much as it may seem like such, this is not a next generation of the Evercade itself, since it still uses all pre-existing cartridges and no future cartridges will be exclusive only to this device. Can’t say I’m surprised by that decision, but I am a bit floored by the decision to go all in on analog when barely anything analog capable has been released on Evercade as of yet.
Then again, time will tell…
Presentation
Right from the start, the Evercade Nexus is big compared to every prior handheld Blaze has released up til now. The EXP in particular looks puny compared to the Nexus, as the whole screen nearly matches the size of the full EXP unit itself! I’d say a fair and common comparison would be with the Nintendo Switch Lite, albeit a little smaller and with some nice textured grips on the back, just like the EXP-R. The first thing you’ll notice when pressing these buttons is that they’re really, really loud. Not much of an issue for me personally as I’m not playing this in public all that much, but if you’re hoping to play a game quietly before bed or while next to someone who doesn’t want loud noise, forget about it.
The analog sticks look nice, and are pretty similar to that on a Switch Joy-Con. I really hope they don’t drift like them, and these aren’t hall effect sticks, but neither are the Switch 2 ones, which look similar to this and have held up fine, so it’s not unreasonable to assume these will as well. They at least feel nice to move around, and even push down. (not that any game uses R3/L3 as far as I’m aware)
Emulation quality continues the Evercade tradition of being pretty stellar no matter which system a game originally came from, with top notch audio emulation, cool border options (including a now separate set of wallpapers to apply in Tate mode, in case you only want them on for one orientation) and very crisp visuals, with a catch.
See, back when the VS originally launched, a tiny blur filter would be applied if you changed the screen option to Original or Full Screen, and it was pretty noticeable, jarring and made the image look far worse, since you could easily notice such a thing on the TV. I genuinely cannot tell if this is a thing on the EXP-R, either because the screen is so small, or maybe because it got what the VS got and an update that removes that blur and makes the pixels pop.

So color me surprised when I tried changing a game’s resolution to Original, only for that awful blur to come back. It’s not so bad when playing something like say, Soul Reaver, but in Star X it becomes very noticeable, and there’s no way to turn the blur off outside of sticking to original resolution.

I really, really hope this gets patched ASAP, since with a bigger screen, this blur is way more noticeable and problematic, and if you want to play Tate games in horizontal view, it’s almost mandatory to scale them up via Original sizing anyhow due to how tiny they’ll look otherwise, which will force the blur. It even carries into Tate mode, which is unfortunate, but at least Tate Mode games look reasonably sized in Pixel Perfect mode and not small enough to be a bother.

Speaking of that bigger screen, under normal circumstances, it does leave a pretty good first impression. Compared to the EXP the screen is massive, and very bright and colorful, far more than that of the prior systems. Considering how terrible the viewing angle on the original Evercade was, we’ve come a long way, and this is easily the best screen yet. It’s still LCD VS OLED, but it’s one of the better LCD screens, even if the Nexus’s display is nowhere near the Analogue Pocket’s quality for an LCD.
Unfortunately, my personal unit, and a good bunch of the early batches of Nexus consoles (ie; Preorder/launch units) have a nasty issue with the Bezel, which really didn’t turn out all that great. See, the glue job on the Bezel itself is real poor, and on my unit it led to the bottom left corner lifting from the screen. Note that the actual screen is fine, but the bezel is what protects it, and when the bottom left corner is slightly lifting up, that gets incredibly annoying.
If it was just the corner, that’d be one thing; still very unacceptable for the price point, but at least something that could feasibly be DIY’d into a quick fix, or just mitigated by screen protecting the bezel and making the whole thing less noticeable, but alas, as I played the Nexus over the past week, through a variety of games, I’d often push down on the bezel and smooth it out with my hands across the entire screen, just to ensure it could stick right in place.

Despite my best efforts, the glue situation somehow got worse over time, with my top left corner slowly coming unglued and not staying put, and that’s when I decided I had to can it there and throw it in the box and invoke my warranty. Pretty darn shoddy for these to slip past the factory in such a state, and it would be an abdication of my duty as a reviewer to pretend the issue never existed or was insignificant. Thankfully, Blaze made a public statement of this much quicker than they did with the dying batteries on EXP units, (where they never made a public statement on that fault) and confirmed this bezel glue issue is remedied on a factory level, so I think if you’re reading this from the future this should thankfully no longer be a concern.
Audio wise, the speakers are a huge step up from the EXP lineup; those were insanely quiet even at their loudest point, and while fine enough playing alone in a home, the EXP was barely audible elsewhere, and even paled in comparison to that of the Super Pocket speaker. No longer a concern here, as the Nexus sounds just great right out of the box. I do wish that hitting the volume buttons would display some kind of visual indicator of the volume level, but alas, you have to use your ears to figure that out. There’s plenty of range to find a volume level that works for you, at least, and those buttons are likely to be more of a bother to your bedmate than the game.
Despite all these steps forward, there are steps back, and the biggest regression the Nexus makes in the audio department comes from how it handles wired headphones. On the original EXP, it would act all fussy if you plugged it in with certain headphones and not function properly, usually headphones with a mic or in a headset style, even if the mic was disabled. It made next to no sense considering how the majority of devices work with headphones just fine, but thankfully the EXP-R fixed that issue and made it a lot more flexible. Yet on the Nexus, we’re back to only being able to use certain kinds of headphones without issue, so what’s the big deal? This bewilders me quite a bit, since the last handheld didn’t even have this issue, yet we’re going back two handhelds before to a headphone style that acts funky.
You do at least have a better, more modern solution in the form of wireless headphones, since the Evercade Nexus supports Bluetooth headphones now. I only have Aftershockz to try out, and it seemed to work OK for the most part, but with the usual quirks of wireless headphones, mainly being that of a slight sound delay that can vary by brand. Good for sound tests, but probably more meant for wireless headphones that block out noise vs something abstract like my Aftershockz. This is more likely than not the way you prefer using headphones in the modern era, but I really wish that wired headphone bug didn’t make a comeback.
Gameplay
I should note that for moratorium reasons, I am not mentioning the pack-in game at all when it comes to how 3D games play on this thing. Enjoy Glover instead, and give me around 6 months to come back to a certain duo.
Anyhow, the Evercade Nexus plays games identically to the prior Evercade systems post VS. You have some nice built in games to play right from the jump, (including the ever beloved by me Gotris) a game of the month that rotates with the system updates, (meaning yes, bug fixes are still tied to monthly updates, so you might have to wait a while for stuff to get fixed) and the handy save/load state options, controller remapping, and AES/MVS mode changes for Neo Geo titles. All work pretty much as they do on the EXP, and the same buttons are present on both devices, only with the obvious inclusion of two analog sticks. It does take an annoyingly long time to boot up compared to the EXP-R, but otherwise you pretty much have those features on a bigger and better screen.

If you ignore the sticks, placed near the bottom of the unit, the D-Pad and face button combo looks and feels pretty darn close to the EXP-R, and I can say this layout still works great for 2D games. The D-Pad I unfortunately cannot praise as much as the EXP-R’s D-Pad, because it feels mushy and kinda crappy. The D-pad being bigger, mixed with it likely being screwed in a bit too tight at the factory, often led to many moments of me double tapping in Samurai Shodown II or other fighters and having the D-Pad physically get stuck (even if it thankfully didn’t seem to keep the input stuck), and needing to tap the other way to get it out. Even after all that, I’d have moments of letting go of my D-pad after holding it down, and it just staying still like nothing happened, and on some very rare occasions even sticking the input.

Pretty darn inexcusable for the cost of the system if you ask me, especially when the Evercade VS controller got it right in 2021, and even the EXP-R felt damn near perfect. Either way, you have that as the usual go-to for 2D games, but thankfully you can use the left stick for movement in non-native games, which helps in the case of those Arcade games by giving them just a little extra authenticity. It’s a little awkward to play with the left stick on bottom and face buttons at top, but it worked fine enough with my hands, and I was able to enjoy Glover just fine that way. Bizarrely, the analog control option is still labeled as “BETA” in the system menu, despite this system having analog built in from the get go. Then again, due to that bezel lift, squeaky D-Pad and other quirks, maybe we are just beta testers all along. I sure as hell felt like it.

The one game that felt pitch perfect with the Nexus out of the entire Evercade library was Buggy from Gremlin Collection 2; this was a dualstick game on the PS1, and it carries over beautifully to the Nexus, controlling like a dream and being really comfortable since you’re actually using the two sticks in unison. I really do think dual stick games can really shine on this platform, but unfortunately hardly anything as of now will even use the dual sticks.
Sure, Xeno Crisis is on the system, but that’s only in Genesis form, and you cannot remap buttons to the right analog stick in any way yet. It also sucks in the case of Llamatron on the Minter Collection, since that would be bliss to play with these two sticks, but alas. No dice for Glover on N64 to map the C-Buttons to the right stick either. Hopefully remapping to the right stick can be patched in as an option, to give some of these dual stick titles that extra oomph. Don’t even get me started on games on Atari Arcade 2 that used dual sticks originally that can’t now, since you still have to use the face buttons to fire in games like Lost Tomb and Rescue, which just makes me ponder why these sticks are even here if they’re currently so underutilized, and unable to be further utilized more in the case of the right one? (At least you can use the left stick in pretty much everything else!) Huge missed potential here, and one that’ll need some more time to be realized.
Still, I’m at least happy to say when this thing cooperates, the rock solid emulation quality is still just as good as it is on the other Evercade devices, being top notch. The only sort of Nexus-exclusiveish bugs I found while testing all 87 cartridges in my collection, came in the form of Visco Arcade 1/2, and Taito 3. For some reason, Zoo Keeper in Taito 3, and every non Neo Geo Arcade game in Visco 1/2 has a separate save state bank depending on if you play it on the OG/Super Pocket/Nexus, or the VS/EXP/Alpha. It was weird enough for Zoo Keeper to have this split on ancient hardware and the newer models, but it feels doubly weird for a newish cart to have this error across most of the games, yet alone on hardware that otherwise matches with VS/EXP/Alpha in nearly every other aspect. I really hope they can get this sorted ASAP, since starting over my scorechasing on Nexus after playing on the VS is absolutely infuriating, and when every other Arcade cart works perfectly in sync on the Nexus, I don’t get why some of the newest ones have this oddity.
Luckily, my console carts all had no issues (outside of needing to clean a few older ones to get them to show up), nor did my Computer carts. The Suspend feature in Roguecraft DX works great here, too! The only sort of game incompatibility that exists on Nexus is with Bubble Seahorse Adventures on Indie Heroes 3, which also doesn’t work on the EXP-R, so it yet again skips another handheld. Not much Blaze can do to force it to work, but every other native game I threw at the Nexus loaded and played fine, including Cathedral; a huge relief after the Alpha was incompatible with it. Even if something doesn’t make as good of a usage of the Nexus’s sticks as I’d like it to such as Xeno Crisis, it will boot and play just fine as it would on EXP and so on.

Lastly, I have to go over Eversync the most I can. This is a new gimmick on the Nexus, and one that quite frankly, feels pointless. If you ever had a 3DS and played a NES Virtual Console game, you might remember being able to transmit a copy of the game to a friend and have them take the second controller. It was a pretty neat way of wireless multiplayer even if your friend didn’t have the game, and that’s basically what Eversync is.
If somehow, somewhere, you meet a real live human being with another Evercade Nexus while out and about, and you want to play Chain Reaction with them, you can do so this way. Share the game with them, play with them via streaming, and have fun. I cannot give my own impressions of how this works in practice, because I am not made of money, but it does seem like a concept that might need a bit of work. Unfortunately, there’s no way I could tell to do something actually cool with Eversync like say, play Game Boy and Game Boy Advance games over wireless multiplayer, since it just copies the screen of Player 1 and gives the other person a Player 2 controller input. That won’t work for GB/GBA, so it’s just glorified screen sharing. If that’s a huge reason the price is so high (and not the chip shortage, which I feel is the actual reason), I’d honestly prefer this feature not exist at all. Maybe you’ll get more out of it if you’re a rich family.
Conclusion
Ultimately, the Evercade Nexus is a system I genuinely, truly wanted to deeply fall in love with. The grip feels great, the screen is excellent, and the audio quality from the speakers is top notch. Unfortunately, I cannot just gloss over the bezel issue, even if I am thankful Blaze is fixing it for future batches, because such a fault being commonplace in early batches is pretty damn inexcusable.
It doesn’t help there are other things that feel a bit lesser about the Nexus over the VS and EXP-R, such as the headphone jack regressing to the EXP level of quality, the weird blur filter added when scaling to original or full screen, a squeaky d-pad that loves to stick, the buttons being outrageously loud, and strange analogue stick placement considering the fact hardly anything currently uses the right stick in any capacity, and you can’t remap buttons to it. It still has the top notch emulation of Evercade as a whole, and the few Analog stick games that exist work very well with these, but keep in mind this is still an Evercade at the end of the day.
The same family of systems that tops out at PSX and barely can do N64 without a lot of tweaking, and that is very unlikely to get many analogue intensive games anytime soon, although the pack-in choice was the best pick for an Analog showcase. Maybe Blaze will prove me wrong on that front by putting out more 3D games and getting bigger licenses than they currently have, but considering the price I paid to get one that feels cheaper and more shaky than handhelds I bought for much less, (even in a post-tariff world, and even compared to say, the Super Pockets) $200 is a huge stretch for this thing that’s a tougher call to make.
To me, that price is more fitting of a proper Evercade 2 of some kind, rather than a well polished, yet third revision of the handheld. Thus if you have an EXP of some kind already and enjoy it aplenty, I can’t recommend this at all, unless you really want that increased volume and better screen. Now if you’re new to the ecosystem as a whole and are interested in joining Evercade, I think this still is an OK starting point, if you wait for a future batch that doesn’t have the stupid QC issues my unit has. That or get a VS instead, which still maintains the top spot as the best thing Blaze has ever put out, and also works just fine with analog games.
One day we’ll be able to send the 2020 hardware to the abyss and get more technically impressive games, but that day is not today.
I give the Evercade Nexus a 6 out of 10.
